Schneider Electric GIS Tech Support

We are just getting going with Fiber Manager using 9.3 R2.

If we split a line by adding a splice point or something it splits the line and autoconnects everything as expected but one side ends up with 2 of everything after the split - so 2 blue, blue, 2 red, red buffer tubes etc.

Anyone run into that or have any ideas why?

Hi,

This is the case with us when we use Designer for Fiber Manager. We expect that Miner will release a patch to resolve this. But we don't come across this if we use Fiber Manager (not with Designer).

We are using ArcFM 9.3.1 SP1

Cheers,
Thaviti

we use fiber manager with Designer at 9.3 r 2 and do not see this issue.