ArcFM Patches

ArcFM Desktop, Designer, Extensions, and ArcFM Replication 10.1

ArcFM Solution Patch #304
Mar 25, 2013  ............................................................................  

This patch is intended for installation on top of ArcFM 10.1 (build 276). This patch addresses multiple issues in ArcFM, Mobile Designer, Designer, Network Adapter, Fiber Manager, and the Set ServerOID tool. Clients who use ArcFM, Fiber Manager, Designer, Mobile Designer, Network Adapter, or Geodatabase Replication would benefit from this version of the patch. Read more ...

ArcFM Server and 64-bit Object Reader 10.1

ArcFM Server Patch #305
May 2, 2013  ............................................................................  

This patch is intended for installation on top of ArcFM Server and 64-bit Object Reader 10.1 (build 276). This patch addresses an issue where ArcFM Server and 64-bit Object Reader could not render certain types of Designer features. Clients who use ArcFM Server or 62-bit Object Reader with Designer Features would benefit from this version of the patch. Read more ...

Responder 10.1

Responder Patch #299
Jan 29, 2012  ............................................................................  

This patch is intended for installation on top of Responder 10.1 (build 276). This patch fixes an issue that caused Responder Users to have to react to Pub Sub out of order messages with some manual action. Clients who use Responder on 10.1 and experience occasional warnings for out of order messages from PubSub would benefit from this version of the patch. Read more ...

ArcFM for Silverlight SDK and ArcFM for Silverlight Page 2.2.1

ArcFM for Silverlight Patch #41
Apr 1, 2013  ............................................................................  

This patch is intended for installation on top of ArcFM Silverlight 2.2 (build 109). This version of the patch now fixes an issue where Related Records are not always returned from Identify results. Clients using ArcFM for Silverlight would benefit from this patch. Read more ...

ArcFM Desktop, Designer, Extensions, and ArcFM Replication 10.0.3 SP1

ArcFM Solution Patch #7639
Feb 14, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM 10.0.3 (build 7494). This patch now corrects an issue in ArcFM where downstream traces don't stop at open points in certain situations. Clients who use ArcFM and electric traces would benefit from this version of the patch. Read more ...

Responder 10.0.3 SP1

Responder Patch #7632
Jan 28, 2012  ............................................................................  

This patch is intended for installation on top of Responder 10.0.3 SP1 (build 7629). This patch fixes an issue with Reliability Reports failing to run in Responder 10.0.3 SP1. Clients who use Responder on 10.0.3 SP1 would benefit from this version of the patch. Read more ...

ArcFM Desktop, Designer, Extensions, and ArcFM Replication 10.0.3

ArcFM Solution Patch #7539
Jan 2, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM 10.0.3 (build 7494). This patch corrects an issue where corrupt ArcFM Designer designs could be opened without notification. Clients who may have experienced issues when saving/opening design data from the MM_HIDDEN_PACKAGES table would benefit from this version of the patch. Read more ...

Object Reader New Installer
Mar 13, 2012  ............................................................................  

This patch replaces the existing installer for Object Reader 10.0.3 (build 7494). The new installer corrects an issue where Object Reader would not install if ArcReader was the only installed Esri product on a machine. Users who use Object Reader with ArcReader would benefit from the new installer.

Responder 10.0.3

Responder Patch #7540
Jan 17, 2012  ............................................................................  

This patch is intended for installation on top of Responder 10.0.3 (build 7494). This patch fixes several issues in the Responder product line. Please see the list of bug fixes for more details on these changes. Clients who use Responder would benefit from this patch. Read more ...

ArcFM for Silverlight SDK and ArcFM for Silverlight Page 2.2

ArcFM Silverlight Patch #113
Mar 8, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM Silverlight 2.2 (build 109). This patch includes a fix for editing related records, adding the ability to turn off the functionality that hides layers in Identify due to scale visibility and the ability to disable scaling. In addition, this patch also fixes some issues with the our visual studio templates when developing in the Design tab. Clients using the ArcFM Silverlight would benefit from this patch. Read more ...

ArcFM Desktop, Fiber Manager, Conduit Manager, and Network Adapter 10.0.2

Snapping Patch #7252
May 13, 2013  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.2 (build 7217). This patch corrects an issue where snapping settings were not loading when selecting the same feature/subtype in consecutive sessions. Clients who use snapping settings when creating features would benefit from this patch. Read more ...

Geodatabase Replication Client Patch #7243
Nov 9, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.2 (build 7217). This patch improves the performance of the processing that occurs prior to downloading updates in Geodatabase Replication Client runs, allowing clients to disconnect from the network more quickly. Clients who use Geodatabase Replication would benefit from this patch. Read more ...

Graphics Tab Patch #7234
Apr 5, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.2 (build 7217). This patch fixes an issue where the graphics tab was being rendered as empty when a MXD file was loaded from within ArcMap. Clients who open MXD files within ArcMap would benefit from this patch. Read more ...

ArcFM Locator Patch #7233
Feb 10, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop and Designer Staker 10.0.2 (build 7217). This patch fixes an issue where the ArcFM Locator throws an error and fails when a search is performed using a number where the radix point (decimal point) is marked with a comma instead of a dot. This patch also allows callouts for placed stakes to be correctly placed regardless of map units. All clients who use the ArcFM Locator or Designer Staker would benefit from this patch. Read more ...

Inset Frames Patch #7230 for 10.0.2
Dec 14, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.2 (build 7217). This patch fixes an issue where ArcMap crashes after adding and manipulating Inset Frames in ArcGIS 10 SP3. ArcFM now handles Inset Frames with ArcGIS 10 SP3 without issues just as it did in ArcGIS 10 SP2. Clients who use Inset Frames would benefit from this patch. Read more ...

Gas Valve Isolation Trace Patch #7228
Nov 29, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop and ArcFM Server 10.0.2 (build 7217). This patch fixes an issue where the Gas Valve Isolation Trace returns no results if Squeeze Offs already isolate area, also now the Gas Valve Isolation Trace should not stop at Squeeze Off points that are not fed. Clients who use the ArcFM Gas Valve Isolation Trace on ArcFM Desktop or ArcFM Server would benefit from this patch. Read more ...

Conduit Manager Patch #7224
Sep 13, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.2 (build 7217). The Conduit Manager facility diagram now loads when opening the Diagram Manager. Clients using ArcFM Server tracing functionality would benefit from this patch. Read more ...

ArcFM Server 10.0.2

Gas Valve Isolation Trace Patch #7228
Nov 29, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop and ArcFM Server 10.0.2 (build 7217). This patch fixes an issue where the Gas Valve Isolation Trace returns no results if Squeeze Offs already isolate area, also now the Gas Valve Isolation Trace should not stop at Squeeze Off points that are not fed. Clients who use the ArcFM Gas Valve Isolation Trace on ArcFM Desktop or ArcFM Server would benefit from this patch. Read more ...

Basemap Patch #7223
Sep 9, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Server 10.0.2 (build 7217). This patch corrects issues when tracing with a basemap that has a different projection than the other maps. Clients using ArcFM Server tracing functionality would benefit from this patch. Read more ...

Designer, Designer Express, and Designer Staker 10.0.2

Composite Favorites Patch #7248
Mar 11, 2013  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.2 (build 7217). This patch fixes an issue where there was an error opening a design with layers from two databases in the same SQL Server instance. Designer clients who have designs with layers from two databases of the same SQL Server instance would benefit from this patch. Read more ...

Composite Favorites Patch #7245
Jan 31, 2013  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.2 (build 7217). This patch fixes an issue where the work function setting for composite favorites was not being correctly preserved. Clients who use composite favorites within Designer would benefit from this patch. Read more ...

CU Tab Patch #7235
Apr 24, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.2 (build 7217). This patch fixes an issue where backspace is required when entering next search character in CU tab. Clients who use CU tab search functionality within ArcMap would benefit from this patch. Read more ...

ArcFM Locator Patch #7233
Feb 10, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop and Designer Staker 10.0.2 (build 7217). This patch fixes an issue where the ArcFM Locator throws an error and fails when a search is performed using a number where the radix point (decimal point) is marked with a comma instead of a dot. This patch also allows callouts for placed stakes to be correctly placed regardless of map units. All clients who use the ArcFM Locator or Designer Staker would benefit from this patch. Read more ...

Mobile 10.0.2

Geodatabase Replication Client Patch #7243
Nov 9, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.2 (build 7217). This patch improves the performance of the processing that occurs prior to downloading updates in Geodatabase Replication Client runs, allowing clients to disconnect from the network more quickly. Clients who use Geodatabase Replication would benefit from this patch. Read more ...

Responder 10.0.2

General Responder Patch #7250
Apr 8, 2013  ............................................................................  

This patch is intended for installation on top of Responder 10.0.2 (build 7217) and replaces previously issued patch #7229, #7232, #7236, #7238, #7240, #7244, and #7246. This patch fixes several issues in the Responder product line; please see the list of bug fixes for more details on these changes. Clients who use Responder on 10.0.2 would benefit from this patch. Read more ...

ArcFM Desktop, Fiber Manager, Conduit Manager, and Network Adapter 10.0.1 SP1

Session Manager Patch #7039
Jan 30, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.1 SP1 (build 7031). This patch corrects and issue where posting a session can fail and not properly inform the user of the problem. Clients who use Session Manager would benefit from this patch. Read more ...

ArcFM Gas Valve Isolation Trace Patch #7038
Nov 29, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop and ArcFM Server 10.0.1 SP1 (build 7031). Fixed issues when Gas Valve Isolation Trace returns no results if Squeeze Offs already isolated area, also now the Gas isolation trace should not stop at a squeeze off points that are not fed. Clients who use ArcFM Gas Valve Isolation Trace in ArcFM Desktop or ArcFM Server would benefit from this patch. Read more ...

Relationship Properties Patch #7036
Jun 13, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.1 SP1 (build 7031). The ArcFM Upgrade Geodatabase Tool has been enhanced to restore relationship ArcFM Properties that may have been lost when upgrading a geodatabase to ArcGIS version 10. Clients who have upgraded or are planning to upgrade their geodatabase to ArcGIS version 10 would benefit from this patch. Read more ...

Connection Manager Patch #7033
Apr 26, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 10.0.1 SP1 (build 7031). This patch significantly decreases the time it takes to open Connection Manager. Clients who use Fiber Manager would benefit from this patch. Read more ...

ArcFM Server 10.0.1 SP1

ArcFM Gas Valve Isolation Trace Patch #7038
Nov 29, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop and ArcFM Server 10.0.1 SP1 (build 7031). Fixed issues when Gas Valve Isolation Trace returns no results if Squeeze Offs already isolated area, also now the Gas isolation trace should not stop at a squeeze off points that are not fed. Clients who use ArcFM Gas Valve Isolation Trace in ArcFM Desktop or ArcFM Server would benefit from this patch. Read more ...

ArcFM Desktop, Fiber Manager, Conduit Manager, and Network Adapter 9.3.1 SP2

ArcFM Designer Patch #6023
Oct 19, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 SP2 (build 5980). This patch corrects a crash when MM_PX_VERSIONS or MM_PX_HISTORY table contained a large number of records. Clients who use Designer and have a large number of records in their MM_PX_VERSIONS or MM_PX_HISTORY table would benefit from this patch. Read more ...

ArcFM General Patch #6020
Sep 18, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 SP2 (build 5980). This patch replaces previously issued patches #5983, #5987, #5990, #5992, #5994, #6008, #6013, and #6016. This patch corrects a number of issues in several ArcFM products. Clients who use Feeder Manager, Conduit Manager, or Mobile would benefit from this patch. Read more ...

ArcFM Designer Performance Patch #6015
May 30, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 SP2 (build 5980) and replaces previously issued patch #5982. This patch corrects an issue where grouped WMS layers in Stored Displays prevented the Features tab from populating correctly. This patch also corrects a defect where reopening a design fails because the CU library is reloaded every time the editor is stopped and\or started. All clients who use Designer or WMS Layers would benefit from this patch. Read more ...

ArcFM Stored Items Patch #5996
Dec 7, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 SP2 (build 5980). This patch replaces previously issued patch #5984. This patch improves performance when clicking on Page Templates in the Stored Items dropdown for the first time. All clients who use ArcFM Desktop would benefit from this patch. Read more ...

Map Production Patch #5995
Dec 1, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 SP2 (build 5980). This patch corrects an issue with slow performance when Map Book Explorer opens a large number (thousands) of map books. Performance has been greatly improved with this patch. Clients who use Map Production functionality in any way would benefit from this patch. Read more ...

ArcFM Gas Valve Isolation Trace #5993
Nov 4, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 SP2 (build 5980) and replaces previously issued patch #5986. This patch fixes an issue where the Gas Valve Isolation Trace returns no results if Squeeze Offs already isolate area, also now the Gas Valve Isolation Trace should not stop at squeeze off points that are not fed. Clients who use the ArcFM Gas Valve Isolation Trace would benefit from this patch. Read more ...

Designer, Designer Express, and Designer Staker 9.3.1 SP2

ArcFM Designer Express Patch #6024
Oct 31, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 SP2 (build 5980). his patch fixes an issue where shape edits took a long time to save in Mobile Designer and Mobile Designs which contained a large number of spatial edits took a long time to open. Clients who use Mobile Designer would benefit from this patch. Read more ...

ArcFM Designer Express Patch #6017
Aug 15, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 SP2 (build 5980) and replaces previously issued patches #6007, #6010, and #6014. This patch corrects a defect where a large cost item library resulted in slow performance in Designer Express when editing palette items and searching on the cost tab of the palette. Clients who use ArcFM Designer Express would benefit from this patch. Read more ...

ArcFM Designer Performance Patch #6015
May 30, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 SP2 (build 5980) and replaces previously issued patch #5982. This patch corrects an issue where grouped WMS layers in Stored Displays prevented the Features tab from populating correctly. This patch also corrects a defect where reopening a design fails because the CU library is reloaded every time the editor is stopped and\or started. All clients who use Designer or WMS Layers would benefit from this patch. Read more ...

Design Page Template Patch #5991
Aug 29, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 SP2 (build 5980). This patch corrects an issue where Design Page Templates were not available in view only mode. Clients who use Designer would benefit from this patch. Read more ...

Mobile 9.3.1 SP2

ArcFM General Patch #6013
May 7, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 SP2 (build 5980). This patch replaces previously issued patches #5983, #5987, #5990, #5992, #5994, and #6008. This patch corrects a number of issues in several ArcFM products. Clients who use Feeder Manager, Conduit Manager, or Mobile would benefit from this patch. Read more ...

ArcFM Gas Valve Isolation Trace #5993
Nov 4, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 SP2 (build 5980) and replaces previously issued patch #5986. This patch fixes an issue where the Gas Valve Isolation Trace returns no results if Squeeze Offs already isolate area, also now the Gas Valve Isolation Trace should not stop at squeeze off points that are not fed. Clients who use the ArcFM Gas Valve Isolation Trace would benefit from this patch. Read more ...

Responder 9.3.1 SP2

9.3.1 SP2 Installer Compatibility Patch
June 14, 2010  ............................................................................  

This patch is intended for installation on top of Responder Client, Responder Server, and Responder Mobile Client 9.3.1 SP1 (build 5881). This patch is intended to ensure Responder 9.3.1 SP1 compatibility with the ArcFM 9.3.1 SP2 release. Clients who use Responder on 9.3.1 SP1 and have upgraded their ArcFM install to version 9.3.1 SP2 would benefit from this patch. Read more ...

ArcFM Desktop, Fiber Manager, Conduit Manager, and Network Adapter 9.3.1 SP1

General Patch #5954
May 18, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 SP1 (build 5881). This patch replaces previously issued patches #5889, #5900, #5902, #5906, #5909, #5910, #5919, #5928, #5930, #5933, #5939, #5943, #5950, and #5951. This patch corrects multiple issues in ArcFM Desktop, Designer, Fiber Manager, Conduit Manager, ArcFM Viewer for ArcGIS Engine, and File Geodatabase Replication. All clients would benefit from this patch. Read more ...

Missing Right-Click Options in Locator Tool Patch #5937
Mar 2, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 SP1 (build 5881). This patch corrects an issue where the right-click menu would incorrectly display the Zoom To, Pan, and Highlight options when in a version and a feature was located using a field of a related record. Clients who locate features using a field of a related record would benefit from this patch. Read more ...

Valve Isolation Trace Patch #5935
Mar 2, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 SP1 (build 5881). This patch corrects an issue where the Valve Isolation Trace returns incorrect results when a source is the closest device. Clients who perform gas or water tracing would benefit from this patch. Read more ...

Graphic Favorites Scale Improvements Patch #5915
Nov 3, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 SP1 (build 5881). This patch replaces previously issued patch #5899. This patch corrects an issue where graphics would not maintain their scale when placed. Clients utilizing Graphic Favorites would benefit from this patch. Read more ...

Snapping for ArcFM - Patch #5894
Aug 12, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 SP1 (build 5881). This patch corrects several issues with snapping settings being maintained during map navigation. This patch also improves performance when changing the map extent or refreshing the map. Clients who use ArcFM Snapping settings during editing may benefit from this patch. Read more ...

Standalone Conversion Tool Patch #5890
Aug 4, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 SP1 (build 5881). This patch fixes an issue in the Fiber Manager Standalone Global ID Conversion Tool and the Extended Feeder Manager Standalone Global ID Conversion Tool that caused the tools to crash if no ESRI ArcInfo License was available. All clients who require the 9.3.1 SP1 conversion to Global IDs for Fiber Manager or Extended Feeder Manager should install this patch. Read more ...

ArcFM Server 9.3.1 SP1

Excel Export Parsing Patch #5946
Mar 22, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.3.1 SP1 (build 5881). This patch replaces previously issued patch #5891 and #5920. This patch fixes an issue where some fields were exported incorrectly into Excel, causing the exported file to not be able to open. Clients who export fields containing numbers with hyphens would benefit from this patch. Read more ...

Numerical Localization Patch #5936
Mar 4, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.3.1 SP1 (build 5881). This patch fixes an issue with the comma decimal delimiter in European localization settings. Clients who use a comma as a decimal delimiter would benefit from this patch. Read more ...

Upstream/Downstream Protective Device Tracing Patch #5932
Jan 19, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.3.1 SP1 (build 5881). This patch corrects an issue where Upstream and Downstream Protective Device traces did not return expected results when configured correctly. Clients who perform tracing in the Web ADF Web Application would benefit from this patch. Read more ...

ArcFM Viewer for ArcGIS Engine 9.3.1 SP1

General Patch #5954
May 18, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 SP1 (build 5881). This patch replaces previously issued patches #5889, #5900, #5902, #5906, #5909, #5910, #5919, #5928, #5930, #5933, #5939, #5943, #5950, and #5951. This patch corrects multiple issues in ArcFM Desktop, Designer, Fiber Manager, Conduit Manager, ArcFM Viewer for ArcGIS Engine, and File Geodatabase Replication. All clients would benefit from this patch. Read more ...

Designer and Designer Express 9.3.1 SP1

General Patch #5954
May 18, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 SP1 (build 5881). This patch replaces previously issued patches #5889, #5900, #5902, #5906, #5909, #5910, #5919, #5928, #5930, #5933, #5939, #5943, #5950, and #5951. This patch corrects multiple issues in ArcFM Desktop, Designer, Fiber Manager, Conduit Manager, ArcFM Viewer for ArcGIS Engine, and File Geodatabase Replication. All clients would benefit from this patch. Read more ...

General Designer Express Patch #5912
Oct 29, 2010  ............................................................................  

This patch is intended for installation on top of Designer Express 9.3.1 SP1 (build 5881) and replaces previously issued patches #5903, #5898, #5892, and #5883. This patch addresses several issues with Designer Express. Clients who use Designer Express would benefit from this patch. Read more ...

Mobile 9.3.1 SP1

General Patch #5954
May 18, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 SP1 (build 5881). This patch replaces previously issued patches #5889, #5900, #5902, #5906, #5909, #5910, #5919, #5928, #5930, #5933, #5939, #5943, #5950, and #5951. This patch corrects multiple issues in ArcFM Desktop, Designer, Fiber Manager, Conduit Manager, ArcFM Viewer for ArcGIS Engine, and File Geodatabase Replication. All clients would benefit from this patch. Read more ...

Replication Client Auto-Close Patch #5919
Nov 19, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Geodatabase Replication Server, ArcFM Desktop, and ArcFM Viewer for ArcGIS Engine 9.3.1 SP1 (build 5881). This patch replaces previously issuwed patch #5910. This patch corrects an issue where the ReplicationConsole.exe process would hang if it entered an error state, preventing the ArcFM Geodatabase Replication Client from being scheduled for automatic execution. Clients who automate the ArcFM Geodatabase Replication Client would benefit from this patch. Read more ...

Responder 9.3.1 SP1

Responder Mobile Patch #5957
Aug 24, 2011  ............................................................................  

This patch is intended for installation on top of Responder Mobile 9.3.1 SP1 (build 5881). This patch allows users to enter more than 255 characters into remarks fields in the Responder Mobile Client. Responder Mobile clients whose Responder databases have remarks field lengths set to be greater than 255 characters should apply this patch. Read more ...

9.3.1 SP2 Installer Compatibility Patch
June 14, 2010  ............................................................................  

This patch is intended for installation on top of Responder Client, Responder Server, and Responder Mobile Client 9.3.1 SP1 (build 5881). This patch is intended to ensure Responder 9.3.1 SP1 compatibility with the ArcFM 9.3.1 SP2 release. Clients who use Responder on 9.3.1 SP1 and have upgraded their ArcFM install to version 9.3.1 SP2 would benefit from this patch. Read more ...

General Patch #5954
May 18, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 SP1 (build 5881). This patch replaces previously issued patches #5889, #5900, #5902, #5906, #5909, #5910, #5919, #5928, #5930, #5933, #5939, #5943, #5950, and #5951. This patch corrects multiple issues in ArcFM Desktop, Designer, Fiber Manager, Conduit Manager, ArcFM Viewer for ArcGIS Engine, and File Geodatabase Replication. All clients would benefit from this patch. Read more ...

General Patch for Responder - Patch #5941
Mar 4, 2011  ............................................................................  

This patch is intended for installation on top of Responder Client, Server, and Web machines running 9.3.1 SP1 (build 5881) and replaces previously issued patches #5929, #5897, and #5884. This patch prevents SCADA incidents from rolling up downstream non-outage calls as well as a number of other enhancements. Please see the list of bug fixes below for more details on these changes. Clients who use Responder on 9.3.1 SP1 would benefit from this patch. Read more ...

ArcFM Desktop, Fiber Manager, Conduit Manager, and Network Adapter 9.3.1

ArcFM Server / Map Books Printer List Patch #5747
Apr 25, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop and ArcFM Server 9.3.1 (build 5725) and replaces previous patches #5735 and #5740. This patch corrects an issue that caused a long delay in the Map Book Print dialog. The printer list may also have contained printers not configured for the currently connected user. This patch also corrects several issues in ArcFM Server. Clients who use Map Book plotting and printing, clients who might try to trace large circuits and return massive result sets, and clients in European countries would benefit from this patch. Read more ...

Snapping for ArcFM - Patch #5744
Aug 12, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3.1 (build 5725) and replaces previously released patch #5736. This patch corrects several issues with snapping settings being maintained during map navigation. This patch also improves performance when changing the map extent or refreshing the map. Clients who use ArcFM Snapping settings during editing may benefit from this patch. Read more ...

General ArcFM Patch #5743
July 26, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 (build 5725). This patch fixes an issue in the Fiber Manager Standalone Global ID Conversion Tool and the Extended Feeder Manager Standalone Global ID Conversion Tool that caused the tools to crash if no ESRI ArcInfo License was available. All clients who require the 9.3.1 conversion to Global IDs for Fiber Manager or Extended Feeder Manager should install this patch. Read more ...

Conduit Manager Metric Projection Patch #5732
May 25, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 (build 5725). This patch corrects an issue where conduit cross sections appear sized incorrectly if your data is projected in meters. Clients who use conduit manager and project data in meters would benefit from this patch. Read more ...

Composite Favorites Relationship Patch #5731
Apr 16, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3.1 (build 5725). This patch corrects an issue where creating relationships for Composite Favorites may result in duplicate features when sketched. Clients who use Composite Favorites within ArcFM Desktop would benefit from this patch. Read more ...

ArcFM Server 9.3.1

ArcFM Server / Map Books Printer List Patch #5747
Apr 25, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop and ArcFM Server 9.3.1 (build 5725) and replaces previous patches #5735 and #5740. This patch corrects an issue that caused a long delay in the Map Book Print dialog. The printer list may also have contained printers not configured for the currently connected user. This patch also corrects several issues in ArcFM Server. Clients who use Map Book plotting and printing, clients who might try to trace large circuits and return massive result sets, and clients in European countries would benefit from this patch. Read more ...

Designer 9.3.1

Redline Session Annotation & Design Corruption Patch for ArcFM Desktop #5737
May 10, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM, Designer, and ArcFM Viewer for ArcGIS Engine 9.3.1 (build 5725) and replaces previously issued patch #5728. This patch corrects an issue where annotation created during redline sessions would incorrectly disappear after using the Save Session command followed by the Refresh View command. This patch also corrects a bug that causes the design tree to lose all geo-association under certain scenarios. Clients who use annotation in Redline Sessions or use Designer side by side with Session Manager would benefit from this patch. Read more ...

Mobile 9.3.1

Edit Log Replay Patch #5746 for 9.3.1
Sep 24, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop and ArcFM Viewer for ArcGIS Engine 9.3.1 (build 5725). This patch corrects an issue which prevented XML packets from being opened in the field if the backdrop doesn't contain a feature that is being replayed from the XML edit log. Clients who use ArcFM Mobile XML technology would benefit from this patch. Read more ...

Replication Patch #5745 for 9.3.1
Sep 23, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Geodatabase Replication Server, ArcFM Desktop, and ArcFM Viewer for ArcGIS Engine 9.3.1 (build 5725) and replaces previously issued patch #5733. This patch corrects an issue which caused GDB replication to require a full download unnecessarily. Clients who use ArcFM Geodatabase Replication or the ArcFM Mobile XML technology would benefit from this patch. Read more ...

Redline Session Annotation & Design Corruption Patch for ArcFM Desktop #5737
May 10, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM, Designer, and ArcFM Viewer for ArcGIS Engine 9.3.1 (build 5725). This patch corrects an issue where annotation created during redline sessions would incorrectly disappear after using the Save Session command followed by the Refresh View command. This patch also corrects a bug that causes the design tree to lose all geo-association under certain scenarios. Clients who use annotation in Redline Sessions or use Designer side by side with Session Manager would benefit from this patch. Read more ...

ArcFM Desktop, Fiber Manager, Conduit Manager, and Network Adapter 9.3 Rev2

General Patch #5347
Feb 14, 2013  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168) and replaces preivously issued patches #5343, #5341, #5340, #5332, #5303, #5298, #5288, #5283, #5277, #5268, #5267, #5265, #5230, #5222, #5219, #5186, and #5185. This version of the patch now resolves performance and data integrity issues in Designer. Clients who use Designer would benefit from this patch. Read more ...

Map Cache Patch #5342
Aug 28, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3 Rev2 (build 5168). This patch corrects an issue where the Map Cache is invalidated after running the ArcFM QA/QC version difference. Clients who use Session Manager or Workflow Manager and use the Map Cache tools would benefit from this patch. Read more ...

Date Time Picker Patch #5333
June 7, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3 Rev2 (build 5168). This patch corrects an issue where a Date field that has the ArcFM Date Time Picker custom field editor assigned would not allow a null value after it had been populated once. Clients use the ArcFM Attribute Editor with data configured to use the ArcFM Date Time Picker.Read more ...

Segment Split AutoUpdater Patch #5291
Oct 18, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3 Rev2 (build 5168). This patch corrects an issue where the Segment Split AutoUpdater incorrectly splits line segments in certain network configurations. Clients who utilize the Segment Split AutoUpdater would benefit from this patch. Read more ...

Open Session Freezing Patch #5283
Aug 12, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3 Rev2 (build 5168). This patch corrects an issue where having the ArcFM Locator open and displaying results may cause ArcMap to freeze when opening a session. All clients who use the ArcFM Locator tool and versions would benefit from this patch. Read more ...

GDB Extraction Template Patch #5276
Jun 21, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch allows users with a large number of subtypes to create GDB Extraction Templates. Clients who have a large number of subtypes and need to create GDB extraction templates would benefit from this patch. Read more ...

Composite Favorite Patch #5266
Mar 22, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch fixes a problem where creating relationships within the composite favorite's editor dialog box would result in duplicate features when the favorite was placed. All clients who create composite favorites would benefit from this patch. Read more ...

Process Framework Posting Patch #5219
October 29, 2009  ............................................................................  

This patch corrects a bug where post times in Session Manager and Designer were excessive and the _MMPost version associated with that Session or Design was not getting deleted. All clients who post using the standard Session Manager and/or Designer Post commands. Read more ...

Map Element Ordering Patch #5215
October 12, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch corrects an issue where map elements may not appear in the same order in which they were saved. Clients who use Page Templates, Stored Documents or Map Production would benefit from this patch. Read more ...

Stored Item Performance & Management Patch #5212
October 08, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch improves performance when expanding the Grouped Stored Items dropdown when a large number of stored items (generally over 500) are found in the root level of the hierarchy. This patch also corrects an issue where a user may experience errors using the right click copy and paste tools in the Stored Items Manager. All clients who use the new Grouped Stored Items interface would benefit from this patch. Read more ...

Add to Selection Context Tool Patch #5204
October 01, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch adds the context menu command "Add to Selection" to the QA/QC Version Difference results tree. Clients who wish add to selection from the QA/QC version difference results would benefit from this patch. Read more ...

Custom Application Launching ArcFM Patch #5198
September 08, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch corrects an issue where custom applications that launch ArcMap while having ArcFM licensed may experience an error. Clients who have custom applications that launch ArcMap while ArcFM is licensed would benefit from this patch. Read more ...

ArcFM Server 9.3 Rev2

ArcFM Server Patch #5263
April 15, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.3 Rev2 (build 5168). This patch addresses an issue where ArcFM Server fails when the application also contains ArcGIS Online layers. This patch also addresses an issue where ArcFM Server 9.3 Rev2 fails when the custom application contains a tree-view style results control. Clients who use non-ArcFM map services in conjunction with ArcFM map services or use the 9.2.1 tree-view attribute viewer would benefit from this patch. Read more ...

ArcFM Server ADF Patch #5218
October 14, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.3 Rev2 (build 5168). This patch provides a fix for the problem for ArcFM Server functionality when ESRI map service security is enabled on an internet map service. All clients who use or plan to use ESRI map service security with ArcFM Server. Read more ...

ArcFM Server ADF Patch #5213
October 07, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.3 Rev2 (build 5168) and replaces previously issued patch 5191. This patch provides a workaround for ESRI bug NIM045843 that prevents any of the ArcFM Server ADF components from working on ArcGIS Server version 9.3.1. Additionally, this patch provides a fix for a problem with the Locator configurator in ArcGIS Server manager. All clients who wish to use ArcFM Server 9.3 Rev2 with ArcGIS 9.3.1 will need this patch. Read more ...

ArcFM Server Localization Patch #5199
September 10, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.3 Rev2 (build 5168). This patch corrects a bug where the resx files for Miner.Server.ADF.Tasks and Miner.Server.ADF.Web.UI.WebControls were not installed. Clients who want to localize ArcFM Server would benefit from this patch. Read more ...

ArcFM Server Results Projection Patch #5180
July 27, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.3 Rev2 (build 5168). This patch resolves the issue where results were displayed in a different projection than the underlying map. Also, it resolves the issues the following issues: curves not supported in results, feature classes with subtype field of short integer, and feature classes without a primary display field. All Clients using ArcFM Server at Release 9.3 Rev 2 should install this patch. Read more ...

ArcFM Viewer for ArcGIS Engine 9.3 Rev2

ArcFM Viewer for Engine Internationalization Patch #5239
November 19, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168) and replaces patch #5200. This patch allows users to internationalize additional strings in ArcFM Viewer for Engine. Clients who translate their ArcFM Viewer user interface would benefit from this patch. Read more ...

GPS Datum Selection Patch #5229
November 10, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch allows users to select the datum they wish to use in the GPS Connection Set-Up menu in ArcFM Viewer for ArcGIS Engine. Clients who use GPS and wish to select their datum manually would benefit from this patch. Read more ...

Designer 9.3 Rev2

General Patch #5347
Feb 14, 2013  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168) and replaces preivously issued patches #5343, #5341, #5340, #5332, #5303, #5298, #5288, #5283, #5277, #5268, #5267, #5265, #5230, #5222, #5219, #5186, and #5185. This version of the patch now resolves performance and data integrity issues in Designer. Clients who use Designer would benefit from this patch. Read more ...

Select Non-GIS CU Window Behavior Patch #5246
December 3, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch corrects a bug that caused the Select Non-GIS CU window to close when the enter key was pressed after choosing a CU. After applying the patch, the default behavior of the enter key will be to add the non-GIS CU to the Design and keep the window open. Clients who use Designer would benefit from this patch. Read more ...

Compatible Unit Identifiers Patch #5234
November 25, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch corrects a bug that prevented the creation or editing of a compatible unit if the Name and WMS Code contained the following wildcard characters: $ ^ * + | ?. Clients who use Designer and wish to add or edit CUs with the following wildcard characters: $ ^ * + | ? would benefit from this patch. Read more ...

Thai Characters Patch #5231
November 06, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch corrects issues where the Work Functions Tool in Designer and the Favorites Manager in ArcCatalog displayed Thai characters incorrectly. Designer and ArcFM clients who use a Thai operating system or language pack would benefit from this patch. Read more ...

CU Tab Thai Language Support Patch #5183
August 10, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch addresses an issue where Thai characters display incorrectly on the CU Tab. Designer Clients who use a Thai operating system or language pack would benefit from this patch. Read more ...

Designer Template Favorites Patch #5187
August 06, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch corrects a bug that prevented non-GIS CUs from being added while placing a template favorite. Clients who use Designer and Template Favorites. Read more ...

Geodatabase Manager 9.3 Rev2

General Patch #5341
Aug 15, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168) and replaces previously issued patches #5340, #5332, #5303, #5298, #5288, #5277, #5267, #5265, #5230, #5222, #5186, and #5185. This patch corrects a number of issues through the ArcFM Solution set of products. All clients would benefit from this patch. Read more ...

Geodatabase Manager IMMPxApplication Patch #5201
September 21, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168). This patch changes IMMPxApplication to be a public method instead of protected. Clients who wish to write customizations for the ArcFM Geodatabase Manager and want to leverage IMMPxApplication would benefit from this patch. Read more ...

Mobile 9.3 Rev2

General Patch #5341
Aug 15, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168) and replaces previously issued patches #5340, #5332, #5303, #5298, #5288, #5277, #5267, #5265, #5230, #5222, #5186, and #5185. This patch corrects a number of issues through the ArcFM Solution set of products. All clients would benefit from this patch. Read more ...

Responder 9.3 Rev2

Responder Patch #5323
Feb 4, 2011  ............................................................................  

This patch is intended for installation on top of Responder Client, Server, and Web 9.3 Rev2 (build 5168) and replaces previously issue patches #5211, #5214, #5242, #5252, #5262, #5269, #5282, #5287, #5290, #5307, #5314, and #5318. This patch fixes numerous issues across various parts of the Responder system. All Clients who use Responder should install this patch. Read more ...

General Patch #5303
Nov 30, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 Rev2 (build 5168) and replaces previously issued patches #5298, #5288, #5277, #5267, #5265, #5230, #5222, #5186, and #5185. This patch corrects an issue with the Diff method in IMMTracedElements which was returning incorrect results. All clients would benefit from this patch. Read more ...

Responder Patch #5244
November 23, 2009  ............................................................................  

This patch is intended for installation on top of Responder 9.3 Rev2 (build 5168). This patch requires that Responder Patch #5208 be applied and all configuration changes made before installing. This patch fixes a problem where the Update Population Tool would fail to run when configured for Extended Feeder Manager (EFM) and there are subsources in the CircuitSourceID table which do not exist in the geodatabase. All Clients using EFM on 9.3 Rev2 should install this patch.Read more ...

Responder Patch #5208
September 25, 2009  ............................................................................  

This patch is intended for installation on top of Responder 9.3 Rev2 (build 5168) and replaces previously issued patches #5206, #5203, #5195, #5188, #5184, #5176 and #5172. This patch fixes numerous issues; please see the readme for more information. All Clients on 9.3 Rev2 should install this patch. Read more ...

ArcFM Desktop, Fiber Manager, Conduit Manager, and Network Adapter 9.3 SP1

Designer Performance Patch #5076
Jun 13, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 SP1 (build 4961) and replaces previously released patch #5011, #5065 and #5074. This patch corrects a bug where reopening a design fails because CU library is reloaded every time the editor is stopped and\or started. Clients who use Designer would benefit from this patch. Read more ...

Feeder Manager Patch #5073
Aug 26, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3 SP1 (build 4961). This patch replaces previously issued patches #5032 and #5072. This patch corrects an issue where network junctions do not get a FeederID populated. This patch also corrects an issue where tie devices may incorrectly keep their FeederIDs after a circuit is opened. This patch also corrects a bug where tie devices may incorrectly keep their FeederID's after a circuit is opened. Clients who use Feeder Manager would benefit from this patch. Read more ...

Feeder Manager Patch #5073
Aug 26, 2011  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3 SP1 (build 4961). This patch replaces previously issued patches #5032 and #5072. This patch corrects an issue where network junctions do not get a FeederID populated. This patch also corrects an issue where tie devices may incorrectly keep their FeederIDs after a circuit is opened. This patch also corrects a bug where tie devices may incorrectly keep their FeederID's after a circuit is opened. Clients who use Feeder Manager would benefit from this patch. Read more ...

Stored Display Patch for ArcFM Desktop #5066
July 29, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop 9.3 SP1 (build 4961). This patch corrects issues where switching stored displays while editing may result in an ArcMap crash. All clients who edit and use Stored Displays would benefit from this patch. Read more ...

Network Adapter - DMS Patch #5067
July 20, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 SP1 (build 4961). This patch is meant to fix an issue in which intermittent reversal of line direction in Network Adapter export could corrupt the DMS model. All clients using Network Adapter for DMS should apply this patch. Read more ...

Autoupdater COMException & Fiber Manager Patch #5024
May 15, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 SP1 (build 4961). This patch corrects an issue with Fiber Manager where the Fiber Object Deleted autoupdater (AU) keeps a user from deleting some features in certain circumstances. Clients who use Fiber Manager or clients who write customization for ArcFM would benefit from this patch. Read more ...

Fiber Manager Connection Manager Patch #5022
May 15, 2009  ............................................................................  

This patch corrects an issue where errors may occur if you close the Fiber Manager Connection Manager without first pressing the apply button. Clients who use Fiber Manager would benefit from this patch. Read more ...

Abandon to Subtype Patch #5005
April 13, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 SP1 (build 4961). This patch corrects an issue where the Abandon to Subtype functionality would always abandon to the same subtype regardless of configuration. Clients who use Abandon and have configured the Abandon to Subtype option would benefit from this patch. Read more ...

Favorites Import Patch #4965
December 18, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 SP1 (build 4961). This patch installs a stylesheet that is needed for ArcFM Favorites Import at 93SP1. All clients needing to import favorites would benefit from this patch. Read more ...

ArcFM Server 9.3 SP1

ArcFM Server Subtype Fields Display Patch #4963
January 07, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.3 SP1 (build 4961) and replaces previously issued patch 4962. This patch resolves an issue with ArcFM Server where subtype fields display the subtype code rather than the subtype description. All Clients using ArcFM Server at Release 9.3 SP1 should install this patch. Read more ...

ArcFM Viewer for ArcGIS Engine 9.3 SP1

ArcFM Viewer Customized Dialog Box Patch #5051
August 26, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 SP1 (build 4961). This patch allows users to internationalize additional strings in the Custom Dialog Box in ArcFM Viewer. Clients who translate their ArcFM Viewer user interface would benefit from this patch. Read more ...

Designer 9.3 SP1

Designer Performance Patch #5076
Jun 13, 2012  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 SP1 (build 4961) and replaces previously released patch #5011, #5065 and #5074. This patch corrects a bug where reopening a design fails because CU library is reloaded every time the editor is stopped and\or started. Clients who use Designer would benefit from this patch. Read more ...

Work Request Properties Patch #5036
July 20, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 SP1 (build 4961) and replaces previously issued patch #4979. This patch corrects a bug where drawing errors could occur when creating a work request polygon. This patch also corrects a bug where editing the shape property of the work request or design polygon from the design tab would fail. Clients who use Designer would benefit from this patch. Read more ...

Mobile 9.3 SP1

Mobile Conflict Resolution Patch #5068
Sep 15, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 SP1 (build 4961) and replaces previously issued patches #5061 and #5056. This patch corrects an issue where the conflict resolution is not respected during a mobile import under certain conditions. Specifically, when a feature is deleted on the enterprise but edited in the field and then imported with conflict resolution in favor of the enterprise. All clients who use Mobile would benefit from this patch. Read more ...

Responder 9.3 SP1

Responder Patch #5033
June 22, 2009  ............................................................................  

This patch is intended for installation on top of Responder 9.3 SP1 (build 4961) and replaces previously issued patch 4991. This patch fixes numerous issues; please see the readme for more information. All Clients on 9.3 SP1 should install this patch. Read more ...

Tie Device FeederID Patch #5032
May 22, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 SP1 (build 4961). This patch corrects a bug where tie devices may incorrectly keep their FeederID's after a circuit is opened. Clients who use Feeder Manager would benefit from this patch.Read more ...

Smart Operations Solution Patch #5014
April 01, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 SP1 (build 4961) and replaces previously issued patch #5007. This patch corrects bugs in how the Smartgrid Listener Service processes incoming events from SCADA and DMS, and improves how the Smartgrid Listener Service handles the timestamp of status change events. This patch should be installed by any customer that has implemented SOS 9.3 SP1.Read more ...

Responder Patch #4974
January 21, 2009  ............................................................................  

This patch is intended for installation on top of Responder 9.3 SP1 (build 4961). This patch fixes an issue with reports in Archive Explorer failing due to memory limitations. All Clients on 9.3 SP1 should install this patch if receiving insufficient memory exceptions when running reports from Archive Explorer.Read more ...

Responder Patch #4964
January 06, 2009  ............................................................................  

This patch is intended for installation on top of Responder 9.3 SP1 (build 4961). This patch fixes a memory usage issue with Pub/Sub that was initially introduced at 9.3. All Responder clients on 9.3 SP1 should install this patch. Read more ...

ArcFM Version 9.3

Responder Patch #4688
November 18, 2008  ............................................................................  

This patch is intended for installation on top of Responder 9.3 (build 4676). This patch fixes numerous issues; please see the readme for more information. All Responder clients on 9.3 should install this patch. Read more ...

Multiple Datasources with Session Manager Patch #4685
October 08, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 (build 4676). This patch corrects an issue where the workspace selection dialog did not display when opening a session unless you were using a Designer License. Clients with multiple data sources who use Session Manager and are not licensed for Designer. Read more ...

Fiber Manager ArcSchematics and Required Splitter Patch #4683
September 18, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.3 (build 4676). This patch corrects a defect where Splice Point ArcSchematics for Fiber Manager displays a large Green Dot where the connections in a splice point should be located. This patch updates the code to correct this issue. This patch is recommended for all clients who are currently using the 9.3 version of Fiber Manager. Read more ...

ArcFM Desktop, Fiber Manager, Conduit Manager, and Network Adapter 9.2.1

Mobile and Gas / Water Tracing Patch Patch #4665
July 26, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM Desktop and ArcFM Viewer for ArcGIS Engine 9.2.1 (build 4573) and replaces previously issued patches 4664, 4616, and 4596. This patch corrects issues with redline text failing to update when moved or placed near other redline text. Additionally, this patch corrects issues with gas and water tracing. Clients who use Gas and Water traces or use Redline text would benefit from this patch. Read more ...

Multiple Direct Connections Feeder Manager Patch #4661
March 22, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch allows Feeder Manager to properly initialize when multiple direct connection sources are available. Clients who load maps with multiple direct connection sources and who also use Feeder Manager would benefit from this patch. Read more ...

Feeder Manager Patch #4652
September 16, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573) and replaces previously issued patches 4639, 4635, 4613, 4606 and 4588. This patch provides enhancements for both traditional and extended Feeder Manager. Clients who use Extended Feeder Manager, Traditional Feeder Manager, Server or Responder would benefit from this patch. Read more ...

Inspector, Fiber Manager, Identify Tool, GPS Support and GDB Extraction Patch #4657
September 01, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573) and replaces previously issued patches 4643, 4629, 4599, 4636, 4620, 4577 and 4579. This patch allows users to select the datum they want to use in the GPS Connection Set-Up menu in ArcFM Viewer for ArcGIS Engine. This patch also includes fixes for previously issued patches. Clients who use Fiber Manager, the ArcFM Geodatbase Extraction Tool, ArcFM Inspector, GPS in ArcFM Viewer or the ArcFM Identify Tool would benefit from this patch. Read more ...

Identify Tool Patch #4646
May 27, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM or ArcFM Server 9.2.1 (build 4573) and replaces previously issued patches 4611, 4607 and 4602. This patch corrects a bug where identify tool does not return any results when the option selected is Visible Layers or All Layers, and provides functionality from three previous patches. Clients who use the ArcFM Identify tool in ArcFM Server 9.2.1, and all clients who localize ArcFM would benefit from this patch. Read more ...

Attribute Editor Sorting Patch #4642
April 20, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch corrects an issue where very large numbers (12+ digits) may not sort correctly in the attribute editor. Clients who wish to sort records in the attribute editor with primary display fields of greater than 12 alphanumeric characters would benefit from this patch.Read more ...

Use of a Comma as Decimal in Templates Patch #4628
October 31, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch makes it possible to use a comma in the same way you would use a period to represent a decimal point in the creation of Template Favorites (IE = 0,4 or 0.4). International Clients who are accustomed to using a comma instead of a period to represent a decimal point would benefit from this patch. Read more ...

Drag and Drop Results in Move Instead of a Copy Patch #4623
October 1, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch makes it possible to copy a related record when dragging and dropping it. To activate copy, click the feature and start dragging. Then press the control key and drop it to its desired location. Clients who wish to drag and drop features and force a copy instead of a move would benefit from this patch.Read more ...

Stored Displays with Maplex Patch #4601
May 30, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch corrects a defect where Maplex settings were not persisted in stored displays. Clients who use Maplex labeling would benefit from this patch.Read more ...

Auto Angle Setter Patch #4595
May 02, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch corrects a bug where the auto angle setter autoupdater can fail with a broken layer in the table of contents. Clients who use the Auto Angle setter AU would benefit from this patch. Read more ...

Right Click Remove with QAQC, Selection Hang Patch #4592
April 15, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch corrects a bug where custom code calling QAQC.Selection could crash or hang ArcMap on a right click remove event. Clients who use custom code calling QA.QC Selection could benefit from this patch. Read more ...

Autotext Preview Patch #4584
March 17, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573) and replaces previously issued patch #4578. This patch corrects a bug where autotext may not preview, plot or export correctly using Map Production or core ESRI print tools. Clients who use Autotext Elements on their maps would benefit from this patch. Read more ...

Network Adapter Patch #4580
March 07, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch corrects a Network Adapter bug where Equipment IDs are not included in topology export to Cymdist. Clients using ArcFM 9.2.1 who are implementing a Network Adapter integration with Cymdist 4.1. Read more ...

ArcFM Server 9.2.1

Identify Tool Patch #4646
May 27, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM or ArcFM Server 9.2.1 (build 4573) and replaces previously issued patches 4611, 4607 and 4602. This patch corrects a bug where identify tool does not return any results when the option selected is Visible Layers or All Layers, and provides functionality from three previous patches. Clients who use the ArcFM Identify tool in ArcFM Server 9.2.1, and all clients who localize ArcFM would benefit from this patch. Read more ...

ArcFM Server integration with ArcGIS Server Manager Patch #4597
May 02, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.2.1 (build 4573) and replaces patch #4594. This patch addresses an issue where the ArcFM Attribute Viewer control does not display the grid portion of the result from an ArcFM Task added in ArcGIS Server Manager, and an ESRI task is not automatically linked to the ArcFM Attribute Viewer control when added in ArcGIS Server Manager. Any client using ArcFM Server and ArcGIS Server Manager would benefit from this patch. Read more ...

ArcFM Server Templates in ArcGIS Server Manager Patch
March 28, 2008

This patch is intended for installation on top of ArcFM Server 9.2.1 (build 4573). This patched installer corrects a bug where ArcFM Server templates did not appear in ArcGIS Server Manager if the server name was changed from the default value of 'ArcGIS' during the ESRI ArcGIS Server installation. The updated installer also corrects a series error messages that were displayed when a Web Application was created in ArcGIS Server Manager with the default development language set to Visual Basic.NET. Clients who have changed the default ArcGIS server name during the ESRI ArcGIS Server installation, as well as clients who plan to use VB.NET as their default development language in ArcGIS Server Manager. Read more ...

ArcFM Server Templates in Visual Studio 2005 Patch
March 28, 2008

This patch is intended for installation on top of ArcFM Server 9.2.1 (build 4573). This patched installer corrects a bug where ArcFM Server templates did not appear in Visual Studio 2005 if the machine language was anything other than English. The updated installer also fixes error messages that were generated with the ArcFM Viewer for ArcGIS Server VB.NET template. Clients who use the VB.NET ArcFM Viewer for ArcGIS Server template in Visual Studio 2005 and clients who use ArcFM Server Visual Studio 2005 templates on a machine with the machine language set to something other than English. Read more ...

ArcFMify Custom ESRI.Web.ADF Tasks Patch #4583
March 19, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.2.1 (build 4573). This patch enhances ArcFM Server functionality and allows a developer the ability apply ArcFM settings to their custom ESRI.Web.ADF task results. Clients who are developing their own custom ESRI.Web.ADF Tasks would benefit from this patch. Read more ...

ArcFM Viewer for ArcGIS Engine 9.2.1

Mobile and Gas / Water Tracing Patch #4664
Apr 16, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573) and replaces previously issued patches 4616 and 4596. This patch corrects an issue where Isolation Traces incorrectly stopped at Network Junctions and also increases performance of the Isolation Traces. Additionally, this patch corrects issues with redline text failing to update when moved or placed near other redline text. Clients who use Gas and Water traces or use Redline text would benefit from this patch. Read more ...

Inspector, Fiber Manager, Identify Tool, GPS Support and GDB Extraction Patch #4657
September 01, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573) and replaces previously issued patches 4643, 4629, 4599, 4636, 4620, 4577 and 4579. This patch allows users to select the datum they want to use in the GPS Connection Set-Up menu in ArcFM Viewer for ArcGIS Engine. This patch also includes fixes for previously issued patches. Clients who use Fiber Manager, the ArcFM Geodatbase Extraction Tool, ArcFM Inspector, GPS in ArcFM Viewer or the ArcFM Identify Tool would benefit from this patch.Read more ...

ArcFM Viewer Patch #4581
August 25, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM Viewer for ArcGIS Engine 9.2.1 (build 4573). This patch corrects a defect which will fail to load protective devices into the Electric Trace options when in mobile mode. All clients who use Electric Tracing in the field would benefit from this patch. Read more ...

Designer 9.2.1

Running QA/QC Updates the Workfunction Field Patch #4667
Jan 4, 2010  ............................................................................  

This patch is intended for installation on top of Designer 9.2.1 (build 4573). This patch corrects an issue where Running QA\QC updates the workfunction field and changes it to fire Autoupdaters unnecessarily or can cause errors. Clients who use QA/QC in Designer would benefit from this patch. Read more ...

Design Corruption Patch #4663
March 30, 2010  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573) and replaces previously issued patches 4638 and 4615. This patch corrects a defect that causes the design tree to lose all geo-association under certain scenarios as well as other defects as described in the readme. Clients who use Designer would benefit from this patch. Read more ...

Remove From Design Patch #4618
August 28, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch corrects a bug where using the Remove from Design tool leaves behind non-GIS CUs in the design tree. All clients who use Designer would benefit from this patch. Read more ...

PX SQL Command Timeout Patch #4605
May 30, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch corrects a bug where concurrently saving large designs will cause a time-out error. Clients who use Designer would benefit from this patch. Read more ...

Mobile 9.2.1

Abort Full Download Patch #4651
September 18, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch allows users of GDB Replication to abort a full replica download as an administrative control. Clients who use GDB Replication and want to control whether a full replica download is allowed as an administrative control would benefit from this patch.Read more ...

Inspector, Fiber Manager, Identify Tool, GPS Support and GDB Extraction Patch #4657
September 01, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573) and replaces previously issued patches 4643, 4629, 4599, 4636, 4620, 4577 and 4579. This patch allows users to select the datum they want to use in the GPS Connection Set-Up menu in ArcFM Viewer for ArcGIS Engine. This patch also includes fixes for previously issued patches. Clients who use Fiber Manager, the ArcFM Geodatbase Extraction Tool, ArcFM Inspector, GPS in ArcFM Viewer or the ArcFM Identify Tool would benefit from this patch.Read more ...

Feature-linked Annotation Patch #4624
October 17, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573). This patch corrects a bug where feature-linked annotations are moved back to the default location during Mobile import. Clients who use Mobile and edit the positions of feature-linked annotations will benefit from this patch.Read more ...

Responder 9.2.1

Archive Functionality Patch for Responder Patch #4666
June 16, 2010  ............................................................................  

This patch is intended for installation on top of Responder Archive client machines running 9.2.1 (build 4573). This patch fixes a critical bug that can prevent generation of archive reports in Archive Explorer. All customers who use Responder 9.2.1 would benefit from this patch. Read more ...

Responder Patch #4660
January 5, 2010  ............................................................................  

This patch is intended for installation on top of Responder 9.2.1 (build 4573) and replaces previously issued patches #4659, #4655, #4619, #4617, and #4600. This patch fixes numerous issues; please see the fixed bug list in the readme for more information. All Responder Clients on 9.2.1 should install this patch. Read more ...

Feeder Manager Patch #4652
September 16, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.1 (build 4573) and replaces previously issued patches 4639, 4635, 4613, 4606 and 4588. This patch provides enhancements for both traditional and extended Feeder Manager. Clients who use Extended Feeder Manager, Traditional Feeder Manager, Server or Responder would benefit from this patch.Read more ...

Responder Patch #4637
February 09, 2009  ............................................................................  

This patch is intended for installation on top of Responder 9.2.1 (build 4573). This patch fixes an issue with reports in Archive Explorer failing to show time stamps when computer is using 24 hour time format. All Clients on 9.2.1 should install this patch if they are using 24 hour time on their client machines running Archive Explorer and reports.Read more ...

ArcFM Desktop, Fiber Manager, Conduit Manager, and Network Adapter 9.2 SP3

Design Corruption Patch #4555
March 26, 2010  ............................................................................  

This patch is intended for installation on top of Designer 9.2.0 SP3 (build 4474). This patch replaces previously issued patches #4524, 4530, and #4544. This patch corrects several defects, including one which can cause design corruption. Please see the readme for more information. All clients who use Designer would benefit from this patch. Read more ...

Identify Tool Patch #4516
July 07, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects a bug in the Identify tool where layers inside group layers are not excluded from Identify Tool results when Visible Layers are selected and the group layer is turned off. Clients using ArcFM Viewer for ArcGIS Engine 9.2 SP3 would benefit from this patch.Read more ...

Gas Tracing Patch #4513
June 11, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474) and replaces previously issued patch 4505. This patch corrects several issues with gas tracing at 9.2.0 SP3.. Clients who use Gas Tracing would benefit from this patch. Read more ...

Allow Feeder Manager to continue after ESRI functions return an "invalid EID" Result Patch #4510
May 09, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch allows Feeder Manager to continue tracing after ESRI functions return an 'invalid EID' result. Information regarding the offending feature (element id, feature class id and object id) is logged to the event viewer. Feeder Manager will bypass these areas of the network and continue to trace valid features. Any client using Feeder Manager would benefit from this patch. Read more ...

Template Favorites Patch #4499
March 07, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects a bug where template favorites can not be placed due to the use of GlobalIDs. Clients who use template favorites and GlobalID fields would benefit from this patch. Read more ...

Internationalization Corrections Patch #4500
March 06, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects tooltips and tab displays that were displaying incorrect characters after localization. All clients who localize ArcFM would benefit from this patch. Read more ...

Network Adapter Patch #4497
February 29, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects a Network Adapter bug where Equipment IDs are not included in topology export to Cymdist. Clients using ArcFM 9.2 SP3 who are implementing a Network Adapter integration with Cymdist 4.1 would benefit from this patch. Read more ...

Drag/Drop Patch #4485
February 01, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects a bug where using the drag/drop function to move tree items on the Attribute Editor would occasionally throw errors. All clients who have experienced this bug would benefit from this patch. Read more ...

XML Import/Export Patch #4484
December 03, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects two defects, ArcFM XML Export incorrectly saved to the database when ArcFM Properties were exported, causing any client desktop machines on previous ArcFM versions to be unable to edit, and ArcFM XML Import would display errors when attempting to import some snapping properties into databases with non-matching snapping schemas. All clients would benefit from this patch. Read more ...

Customization Support Patch #4481
December 03, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects a defect when MM_E_CANCEL_EDIT is called in a customization. Only clients or business partners writing customized autoupdaters would benefit from this patch. Read more ...

Personal SDE Login Patch #4479
November 15, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects a defect to correctly login to a personal SDE instance. Clients who use Personal SDE databases would benefit from this patch. Read more ...

ArcFM Server 9.2 SP3

There are no released patches for ArcFM Server 9.2 SP3

Designer 9.2 SP3

Design Corruption Patch #4555
March 26, 2010  ............................................................................  

This patch is intended for installation on top of Designer 9.2.0 SP3 (build 4474). This patch replaces previously issued patches #4520, #4524, 4530, and #4544. This patch corrects several defects, including one which can cause design corruption. Please see the readme for more information. All clients who use Designer would benefit from this patch. Read more ...

Structural Analysis Patch #4553
December 4, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.0 SP3 (build 4474) and replaces previously issued patch #4552. This patch corrects multiple bugs within in the Designer Structural Analysis tools including loads not getting calculated correctly on span guys. Clients who use Structural Analysis Tools in Designer would benefit from this patch. Read more ...

Design Stored Display with Graphics Patch #4532
January 2, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.0 SP3 (build 4474). This patch corrects a defect in Designer where opening consecutive design stored displays with graphic elements causes failure. All clients who use Designer would benefit from this patch. Read more ...

Design Tree Order Patch #4523
September 25, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects a bug where the order of the design tree is being changed when opening an existing design. Clients who use Designer would benefit from this patch. Read more ...

Secondary Circuit Analysis Labeling Patch #4529
September 25, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects a bug where secondary circuit analysis labels did not correctly adjust to different projected coordinate systems. For example, feet would be labeled in the tools and forms even though the data was in meters. Clients who use secondary circuit analysis within Designer would benefit from this patch. Read more ...

SQL Server Concurrent Design Save Patch #4518
July 09, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects a bug where concurrent saving of Designs on a SQL Server database failed. Clients who use Designer and SQL Server would benefit from this patch. Read more ...

Send To Design Patch #4515
June 12, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects a bug where Send to Design will fail when working with a feature that contains a large number of related objects. This bug only occurs in a mobile setting. Clients who use mobile Designer would benefit from this patch. Read more ...

Send to Design Patch #4496
February 01, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch corrects a bug where the Send to Design context menu tool on the CU Tab becomes disabled when Mobile is configured. Clients who use the Send to Design functionality provided in the CU Tab to send CU's to the Design Tab. Read more ...

Mobile 9.2 SP3

Importing Inspection Records Results in Duplicate Records Patch #4545
June 23, 2009  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.0 SP3 (build 4474). This patch corrects a bug where inspection records can get duplicated during import into ArcSDE. This patch also corrects the behavior when updating mobile features with inconsistent Object ID and Server OID values. Clients using ArcFM 9.2 SP3 who use Mobile ArcFM or Inspector would benefit from this patch. Read more ...

Mobile Patch #4531
November 4, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.0 SP3 (build 4474). This patch corrects a bug where through a specific series of events, mobile packets corresponding to mobile designs or sessions can be inadvertently deleted by the system. Clients using ArcFM 9.2 SP3 who are using any mobile components, including Mobile Designer, Mobile ArcFM, Inspector, or Redliner, would benefit from this patch. Read more ...

Mobile Deletion of Related Objects Patch #4528
October 3, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2.0 SP3 (build 4474). This patch corrects a bug where deletions of related objects on the field are not being written to the mobile packet. Clients who use Mobile would benefit from this patch. Read more ...

Add ServerOID Tool Patch #4495
August 21, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP3 (build 4474). This patch adds the ArcFM Add Server OID tool to 92sp3. This is to allow users to avoid complications using ArcFM Geodatabase Extraction to File Geodatabases. Clients who need to extract SDE data to a file geodatabase may benefit from this patch. Read more ...

SMTP Validation Patch #4514
June 11, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM Geodatabase Replication Server 9.2 SP3 (build 4474). This patch corrects a bug where validation would fail on SMTP server names that contain a dash. Clients who use Geodatabase Replication would benefit from this patch. Read more ...

ArcFM Version 9.2 SP2

Responder Defects and Enhancements for Oracle Patch #4369
October 11, 2007  ............................................................................  

This patch is intended for installation on top of Responder 9.2 SP2 (build 4355). This patch delivers performance enhancements and several defect fixes. This patch also fully replaces previously issued patch #4362. Clients who have Oracle as their database application, and who use Responder, would benefit from this patch. Read more ...

Save Design Performance Patch #4364
September 07, 2007  ............................................................................  

This patch is intended for installation on top of Designer 9.2 SP2 (build 4355). This patch corrects a defect in save design to now correctly save a design in the presence of a large MM_WMS_COMPATIBLE_UNIT table and improve performance of save design for any size MM_WMS_COMPATIBLE_UNIT table. All Designer clients would benefit from this patch. Read more ...

Responder Restoration Patch #4363
September 04, 2007  ............................................................................  

This patch is intended for installation on top of Responder 9.2 SP2 (build 4355). This patch corrects a defect in the Call Entry form to now correctly search on wildcard characters. All Responder clients would benefit from this patch. Read more ...

GDB Extract Patch #4360
August 01, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP2 (build 4355). This patch corrects two bugs, extracting to an .mdb file failed and using the command line extraction tool to create a file geodatabase failed. All clients who use the GDB Extraction tool would benefit from this patch. Read more ...

Gas and Water Trace Weight Initialization Patch #4358
July 17, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP2 (build 4355). This patch corrects a bug where gas and water trace weight initialization failed without a gas or water geometric network present. All clients planning to initialize gas or water trace weights will need this patch. Read more ...

Attribute Editor Field Display Patch #4357
July 12, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP2 (build 4355). This patch corrects two bugs in the Attribute Editor, one where fields ordered to display above the ObjectID field were not displayed in the Attribute Editor, and a second with the behavior of the Mass Attribute Update. All clients who modify their field display order where the ObjectID field is not the first field would benefit from this patch. Read more ...

ArcMap launch with .MXD Patch #4356
July 02, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 SP2 (build 4355). This patch corrects a bug where using an .mxd to launch ArcMap prevented ArcFM tools from enabling. All clients would benefit from this patch. Read more ...

ArcFM Version 9.2

Responder Message Router Patch #4181
April 27, 2007

This patch is intended for installation on top of Responder Server 9.2 (build 4180). This patch corrects a bug where the message router could not be hosted by the Responder Windows Service. Only clients who are running Responder business services on multiple machines will need this patch. If you are interested in obtaining details, please contact Technical Support.

PxAdmin for SQL Patch #4182
April 24, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.2 (build 4182). This patch corrects a bug where the PxAdmin tool would not launch with SQL Server 2000. OAll clients on SQL Server 2000 will need this patch. Read more ...

ArcFM Version 9.1.2 SP1

Mobile Import Patch #3665
November 13, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch adds a new subtask for Get Conflicts and adds a parameter to the Mobile Import subtask to IgnoreConflicts. All mobile users would benefit from this patch. Read more ...

Multiple Issues Patch #3664
October 02, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch improves the performance of displaying large lists of related objects in the treeview. This patch also replaces previously issued patches #3618, #3631, #3641, #3622, #3646, #3651, #3659, and #3662. All mobile users would benefit from this patch. Read more ...

Feeder Manager Stack Overflow Error while deleting features Patch #3660
August 27, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch provides two new settings in the Feeder Manager Settings dialog within ArcCatalog. The first setting provides the ability to set a global maximum path length limit for all tracing function in Feeder Manager with exception of island tracing. The second option allows the administrator to set the limit for the island-test trace. Setting an appropriate value for both values will eliminate the occurrence of stack overflow errors generated from Feeder Manager. Clients who are experiencing stack overflow errors while using Feeder Manager.Read more ...

Autotext Element Patch #3658
July 16, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch corrects a bug where adjacent autotext elements might not preview or plot correctly. Clients who use map production with Adjacent Autotext Elements would benefit from this patch. Read more ...

QAQC Report Patch #3657
June 17, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch corrects a bug where QA/QC Reports would display incorrect characters in the presence of certain language schemes. Clients who export to a language that does not support the UTF-16 standard would benefit from this patch. Read more ...

Gas Bypass Valve Patch #3656
June 09, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch corrects several issues with gas tracing at 9.1.2 SP1. This patch also replaces previously issued patch 3653 and 3655. Clients who use Gas Tracing would benefit from this patch. Read more ...

Customization Support for PXAdmin Patch #3648
November 21, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch corrects a defect in IMMPxExtensionNodeSupport in support of customizations. This patch is recommended only for those who are extending the Process Framework functionality.Read more ...

Geodatabase Replication Patch #3647
October 26, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM or ArcFM Replication Server 9.1.2 SP1 (build 3597). This patch replaces previously issued patches #3610 and #3600. This patch corrects a defect to correctly replicate attributes with leading spaces, and improves stability of the GDB Replication Server by removing functionality related to the Replica ID. All clients using GDB Replication would benefit from this patch.Read more ...

Custom Snapping Patch #3645
September 06, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch provides the ability to use both ArcFM and a custom snapping agent. Only clients who wish to use a custom snapping agent would benefit from this patch. Read more ...

Template Tool Cancel and Non-UI License Manager Patch #3644
August 31, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM or Designer 9.1.2 SP1 (build 3597). This patch corrects two defects, canceling the placement of a template favorite while in a design will now correctly update the design tab, and improved recovery of the license manager in an application that does not use a user interface (for example, the custom Batch Reconcile and Post tool). Clients who use the template favorite tool would benefit from this patch. Clients who use a Telvent Miner & Miner Batch Reconcile and Post tool may benefit from this patch and should contact Tech Support to discuss. Read more ...

Work Request Polygons and MMECancelEdit Patch #3643
August 20, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch corrects a bug where a call to MM_E_Cancel_Edit caused issues with the Work Request Polygon. Designer clients who have customizations that utilize to MM_E_Cancel_Edit would benefit from this patch. Read more ...

Phase Swap Patch #3642
August 01, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch provides functionality in the phase swap tool to accommodate data models that use a single field to store normal position for all phases. Only clients who model their data in this manner would benefit from this patch. Read more ...

Dimensions with AutoUpdaters Patch #3641
July 12, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch corrects a bug where AutoUpdaters did not fire on a Dimension feature class. Only clients who use the noted functionality would benefit from this patch. Read more ...

ArcFM Server Context Objects Patch #3639
July 06, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.1.2 SP1 (build 3597). This patch corrects a bug where memory leak errors were reported in the event viewer, exposed by releasing server context objects with ArcFM Server. Clients who use ArcFM Server would benefit from this patch. Read more ...

MMCancelEdit Behavior Patch #3640
July 06, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch corrects a bug in calling MMCancelEdit from an AutoUpdater that disabled the Update button on the Attribute Editor. Clients who specifically use the described behavior would benefit from this patch. Read more ...

QA/QC Tool in Designs Patch #3638
June 29, 2007  ............................................................................  

This patch is intended for installation on top of Designer 9.1.2 SP1 (build 3597). This patch corrects a bug where using the QA/QC tool in a design would incorrectly modify attributes on the geographical unit, possibly posting inaccurate data to the geodatabase. This patch is recommended for all Designer users. Read more ...

Feeder Manager Locator Performance Patch #3632
June 29, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch provides a significant performance enhancement in the use of the Feeder Manager Locator. All clients would benefit from this patch, particularly those with a large number of feeders. Read more ...

Design Page Templates Patch #3634
June 28, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch corrects a bug in Designer where selecting the Remove All button in the Designer Page Template Manager removed all design page templates for all designs, rather than removing all design page templates for only the open design. All clients who use the design page template functionality would benefit from this patch. Read more ...

ArcFM Server Multi-Threading Patch #3633
June 11, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM Server 9.1.2 SP1 (build 3597). This patch replaces previously issued patch #3630. This patch corrects a bug where licensing was not being recognized for multi-threaded applications and preventing correct licensing of ArcFM Server. Clients who are developing on ArcFM Server would benefit from this patch. Read more ...

Engine Viewer Tools Patch #3628
May 02, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM Viewer for ArcGIS Engine 9.1.2 SP1 (build 3597). This patch corrects two bugs, one to correct the disappearance of the Table of Content while using the ink tool, the second to persist shortcut key settings. Read more ...

Raster Mosaics Patch #3626
April 25, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch corrects a bug where raster mosaic layers were disconnected when loaded through a stored display. Clients who wish to store raster mosaics in stored displays or stored documents. Read more ...

Mobile Synchronizer Patch #3623
April 16, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch corrects a bug where the Mobile Synchronizer was not functional. Only clients who use the Mobile Synchronizer will need this patch. Read more ...

Responder Incident Device Management Enhancements Patch #3615
December 13, 2006  ............................................................................  

This patch is intended for installation on top of Responder 9.1.2 SP1 (build 3597). This patch fully replaces previously issued patch #3608. This patch provides several changes and bug corrections. This patch would benefit all clients using Responder. Read more ...

Workflow Manager Filter Performance Patch #3611
November 17, 2006  ............................................................................  

This patch is intended for installation on top of Designer 9.1.2 SP1 (build 3597). This patch improves the performance of the User filter in Workflow Manager. All Designer clients would benefit from this patch. Read more ...

TreeView and Drag/Drop Relationships Patch #3609
November 13, 2006  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). This patch fully replaces previously issued patch #3607. Corrects several bugs: D8ListItem returning the correct selected state; Using the drag/drop function to move and create related objects on the Attribute Editor; Behavior of the Features tab. This patch would benefit all clients, particularly if using the drag/drop functionality provided in the Attribute Editor to move features or related objects from one feature to another during either sessions or designs. Read more ...

CU Finder Patch #3603
November 10, 2006  ............................................................................  

This patch is intended for installation on top of Designer 9.1.2 SP1 (build 3597). Corrects a bug where the CU Finder was unable to find CUs that contain the # sign in a CU defining attribute. This patch would benefit clients who use the # sign in the CUDAs. Read more ...

GDB Replication Server Annotation Handling Patch #3605
October 25, 2006  ............................................................................  

This patch is intended for installation on top of GDB Replication Server 9.1.2 SP1 (build 3597). Corrects a bug where the GDB Replication server would stop if an annotation feature were found with null geometry. Clients using GDB Replication would benefit from this patch. Read more ...

Edit Stability Patch #3598 (ArcFM)
September 13, 2006  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1.2 SP1 (build 3597). Corrects a bug that caused occasional rapid shutdowns while editing in a Session. Recommended for all users. Read more ...

Edit Stability & SecCircuitAnalysis Patch #3598 (Designer)
September 13, 2006  ............................................................................  

This patch is intended for installation on top of Designer 9.1.2 SP1 (build 3597). This patch contains the bug fix included in the ArcFM version of the 3598 patch, and one additional bug fix. Corrects a bug that caused occasional rapid shutdowns while editing in a Design. Also corrects a bug where Secondary Circuit Analysis was not using a model-name driven table for electric properties. Recommended for all Designer users. Read more ...

ArcFM Version 9.1.2

MMPOST Version Correction Patch #3460
July 17, 2006  ............................................................................  

Corrects a bug where the MMPOST version was not being deleted correctly following post of a session or design. Recommended for any clients who use ArcFM tools to post sessions or designs. Read more ...

External WMS Design .XML Failure Patch
June 16, 2006

Intended for installation on top of Designer 9.1.2 (build 3446). Please note: This QFE will affect a limited number of clients. Please contact Miner & Miner Technical Support (support@miner.com) to discuss using this QFE.

Corrects a bug where importing a design .xml from an external work management system failed. Only clients who open designs provided by a work management system other than the ArcFM Work Flow Manager should install this QFE.

User Page Templates Patch #3455
June 9, 2006  ............................................................................  

This Patch corrects a bug where the Page Template “Save” and “Save As” functions were disabled for non-admin SDE users. All ArcFM and Designer clients will benefit from this QFE. Read more ...

Responder Spatial Views Patch #3454
June 9, 2006  ............................................................................  

This QFE is intended for installation on top of Responder Client and Responder Server 9.1.2 (build 3446). This QFE corrects a bug where having spatial views in the geodatabase kept Responder Explorer from launching. This QFE is recommended only for users who have experienced the specific bug addressed by the QFE.

CU/ Work Function Updates Patch #3453
June 1, 2006  ............................................................................  

This QFE corrects a bug where labeling and attributes of a geographical unit (GU) in a design were not updating when edits were made to change the compatible unit (CU) or the work function. This behavior was corrected on the Design tab, Work Function Tool, Targets tab and Favorites editor. All clients who use Designer will benefit from this QFE.

Orphan Version Cleanup Tool Patch #3451
May 12, 2006  ............................................................................  

This QFE corrects a bug in the Orphan Version Cleanup tool where the tool was not deleting versions as expected. See the Notes section of the ReadMe for details. Clients who use Session Manager or Workflow Manager to edit in sessions or designs.

GDB Extract Tool Patch #3450
May 11, 2006  ............................................................................  

This QFE significantly improves the performance of the GDB Extract tool and simplifies the user experience. The GDB Extract tool can be used in many arenas, but is most commonly used for building the mobile backdrop database. This QFE is recommended for clients using the mobile functionality.

Impacts on Custom Code, ArcFM Solution Interop 91SP1 for 9.1.2
April 18, 2006  ............................................................................  

The ArcFM Solution Interop 91SP1 for 912 installer is intended for users with custom code written in .NET at ArcFM Solution 91SP1. To use that custom code successfully with ArcFM Solution 912, this installer provides the necessary files ArcFM requires. This installer is provided separately on the Telvent Miner & Miner download website, or is available as an option at the end of the ArcFM Solution 9.1.2 installers.

ArcFM Version 9.1 SP1

Version Refresh Patch #3137
Aug 25, 2008  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1 SP1 (build 3064). It corrects an issue where the parent version was not properly refreshed when versions were switched or created. The patch is recommended for clients who use QA/QC Version differences or other version comparison tools. Read more ...

PX Caching, Non-UI Licensing, and Mobile Patch #3133
Aug 24, 2007

This patch is intended for installation on top of ArcFM or Designer 9.1SP1 (build 3064) and replaces previously issued patches #3132, #3119 and #3074. Please note: This QFE will affect a limited number of clients. Please contact Telvent Technical Support (support@telvent.com) to discuss using this QFE.

This patch delivers two new changes to improve the functioning of the Telvent custom Batch Reconcile and Post Tool, and corrects several bugs with mobile. This patch would benefit clients that are using the Telvent custom Batch Reconcile and Post tool. This patch would also benefit all mobile users.

Designer Performance Patch #3131
June 28, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1SP1 (build 3064) and replaces previously issued patches #3128, #3117 and #3104. It improves the performance of opening and saving of designs. It also corrects a performance issue with saving designs caused by a bug where CU records in the MM_PX_Current_State table were not being deleted correctly, leaving behind orphaned CU records, and bug fixes related to save prompts during designs and design tree corruption when a GU without CUs was present in the design tree. This patch is recommended for all Designer users. Read more ...

Map Production .geopdf Compatibility Patch #3127
May 23, 2007  ............................................................................  

This patch is intended for installation on top of ArcFM 9.1SP1 (build 3064) and replaces previously issued patches #3092 and #3072. It provides the ability to export to a .geopdf format using Map Production export functionality, the interop that includes the changes for the IMMMapBook interface, as well as improvements in exporting formatting from Map Production to a .pdf file. This patch is recommended for any users interested in exporting to TerraGo's .geopdf format. Read more ...

QA/QC Tool in Designs Patch #3121
April 13, 2007  ............................................................................  

This patch is intended for installation on top of Designer 9.1SP1 (build 3064). It corrects a bug where using the QA/QC tool in a design would incorrectly modify attributes on the geographical unit. This patch is recommended, but not critical, for all Designer users. Read more ...

Template Favorites, Secondary Circuit Analysis Patch #3118
October 26, 2006  ............................................................................  

This patch is intended for installation on top of Designer 9.1SP1 (build 3064). It also completely replaces previously issued patch #3107 for Secondary Circuit Analysis. This patch addresses several bugs: 1) Selecting the Prompt for CU option in a CU Template Favorite was not persisting; 2) Improvements to the ability to configure Secondary Circuit Analysis. This patch would benefit Designer users who utilize the two tools affected, Template Favorites or Secondary Circuit Analysis. Read more ...

Network Adapter Export Performance Patch #3112
October 4, 2006  ............................................................................  

This patch delivers a performance enhancement, as well as replaces previously issued patch #3097. This patch provides the following functionality: Improvements to the performance of the Network Adapter export to all 3rd party engines through changes to the relationship handling; Improvements to the Network Adapter export to MultiSpeak for large feeders by reducing the size of the resulting .xml file; Bug fix for MultiSpeak export options not being saved. This patch is recommended for all clients using Network Adapter, regardless of which analysis engine is used (Cymdist, Synergee, or MultiSpeak-compliant).

GDB Extract Enhancements Patch #3106
July 13, 2006  ............................................................................  

Replaces previously issued QFE #3100. This patch significantly improves the performance of the GDB Extract tool, simplifies the user experience, and corrects a bug to suppress user messages during batch mode. The GDB Extract tool can be used in many arenas, but is most commonly used for building the mobile backdrop database. This patch is recommended for clients using the mobile functionality.

Large Coded-Value Domain Patch #3099
May 11, 2006  ............................................................................  

This QFE improves the performance of the Attribute Editor when a large coded-value domain (1000 to 4000 entries) exists in the data. Recommended for clients who have large coded-value domains.

CYMDIST Phase Merge Scenarios Patch #3098
May 10, 2006  ............................................................................  

This QFE contains a bug fix for exporting phase merge scenarios to Cymdist 4.0. Recommended for clients who use Network Adapter, exporting to Cymdist, and have experienced errors or crashes during exports of feeders that contain phase merges.

Phase Swap Operation Patch #3096
May 1,2006  ............................................................................  

This QFE corrects a bug where nested related features or objects (i.e. Switch related to a Transformer related to a Transformer Unit) were not swapped during a phase swap operation. Recommended for clients who use the Phase Swap tool and have the data condition described above.

Attribute Editor Drag/ Drop Function Patch #3093
April 10, 2006  ............................................................................  

This QFE corrects a bug where using the drag/ drop function to move related objects on the Attribute Editor did not raise the correct “RelationshipDeleted” event. Raising this event is key to the correct function of some custom client tools. Recommended for clients who use the drag/ drop functionality provided in the Attribute Editor to move related objects from one feature to another during either sessions or designs. Also recommended for clients creating custom tools that rely on AU events being raised for correct processing of their custom tool.

.NET Framework 2.0 Patch
January 26, 2006  ............................................................................  

This QFE contains config files that allow ArcFM to run on a machine that has had .NET Framework 2.0 installed. Recommended for any desktop machine that has .NET Framework 2.0 installed. Please see the ReadMe for details and common symptoms of this issue.

Responder Server Patch #3090
January 24, 2006  ............................................................................  

This QFE resolves a Responder Server-DataSetConfig.cache already in use error with multiple call takers.

Network Adapter Analysis Patch #3070
October 10, 2005  ............................................................................  

This QFE resolves an issue where NA/ES load flow analysis may not complete if equipment IDs are not defaulted for invalid ID types. It also corrects a problem with NA Exports into SynerGEE where analysis fails over unknown conductor configuration.

Responder Web Report Patch
October 6, 2005  ............................................................................  

This QFE corrects an error when accessing the "Reliability Indices: System-Wide By Month" web report. Strongly recommended for anyone using Responder 9.1 SP1.

Rx Server & Prediction Patch #3073
September 29, 2005  ............................................................................  

This QFE is intended for installation on top of Responder 9.1 SP1. Resolves errors when shutting down Rx server and Rx prediction.

Connect Network Feature Autoupdater Patch #2881
July 8, 2005  ............................................................................  

This QFE fixes a bug where deleting all features connected to a conductor that has the ArcFM Connect Network Feature autoupdater assigned corrupts the conductor, causing Feeder Manager and Electric Tracing to fail.

ArcFM Version 9.0.1

Mobile/ Designer Patch #2672
April 12, 2006  ............................................................................  

This QFE is intended for installation on top of ArcFM 9.0.1 SP3 (build 2633) and replaces QFEs 2653 and 2667. It corrects a bug where the design tree would become corrupted when a GU without CUs was present in the design tree. Additional functionality is included: see the ReadMe for details.

Water Valve Isolation Traces Patch #2661
November 3, 2005  ............................................................................  

This QFE is intended for installation on top of ArcFM 9.0.1 SP3 (build 2633) and replaces the previously issued QFE_901SP3_2659. It corrects a bug where water valve isolation traces for critical valves do not function properly when the traces contain non-critical valves.

Work Request/ Design Patch #2660
November 3, 2005  ............................................................................  

This QFE is intended for installation on top of ArcFM 9.0.1 SP3 (build 2660). It corrects a bug occurring when a Work Request and a design happen to have the same WorkRequestID and DesignID; if that design was deleted then the Work Request with the same ID as the design would have its work flow status value reverted back to Initiated.

Composite CUs Patch #2601
March 29, 2005  ............................................................................  

This QFE is intended for installation on top of Designer 9.0.1 SP2. It corrects a bug occurring when a composite that contains CUs exists in a template, CUs within the composite do not show up in Design Tab after template is placed.

QA/QC Domain Patch #2597
March 28, 2005  ............................................................................  

This QFE is intended for installation on top of ArcFM 9.0.1 SP2 (build 2530). It corrects a bug where QA/QC inadvertently removes domains when invalid values are detected on a field.

DAPI Design XML Patch #2585
March 18, 2005  ............................................................................  

This QFE is intended for installation on top of Designer 9.0.1 SP2. It corrects a bug where DAPI writes out compatible unit defining attributes to the design XML on save.

Workflow Manager Design XML Patch #2582
March 18, 2005  ............................................................................  

This QFE is intended for installation on top of Designer 9.0.1 SP2. It corrects a bug where Workflow Manager does not put version base info in the design XML except in the case of design copies.

Reconcile Tool Conflicts Patch #2570
March 18, 2005  ............................................................................  

This QFE is intended for installation on top of ArcFM 9.0.1 SP2 (build 2530). It corrects a bug where if there are conflicts when using our reconcile tool, values from the parent are automatically accepted.

Process Framework Out of Memory Error Patch #2567
March 18, 2005  ............................................................................  

This QFE is intended for installation on top of ArcFM 9.0.1 SP2 (build 2530). It resolves an "out of memory" error when starting Process Framework application from console or web service.

Blob Method Upgrade Patch #2544
March 18, 2005  ............................................................................  

This QFE is intended for installation on top of Designer 9.0.1 SP2. It corrects a bug where after upgrading to use blob method of storing designs, work locations lose shape.

PhaseDesignation Model Name Patch #2547
February 22, 2005  ............................................................................  

This QFE is intended for installation on top of ArcFM 9.0.1 SP2 (build 2530). It corrects a bug where a change to Phase Swap rather than Phase Designation domain occurs when looking for PhaseDesignation model name.

Login Object Failure Patch #2542
February 22, 2005  ............................................................................  

This QFE is intended for installation on top of ArcFM 9.0.1 SP2 (build 2530). It corrects a bug where login object fails when "DATABASE" property is provided in PropertySet to connect to a SQL Server Database.

ArcFM Version 8.3.2

Upgrade Tool "Null" Patch #1864
February 23, 2006  ............................................................................  

This QFE is intended for installation on top of ArcFM 8.3.2 SP2 (build 1860). It corrects a bug where invalid use of ‹null› in upgrade tool prevents upgrade on certain data.

Null Shape GU Patch #1870
November 18, 2004  ............................................................................  

This QFE is intended for installation on top of ArcFM 8.3.2 SP2 (build 1860). It corrects a bug where posting a design fails without warning when posting with a GU that hasn’t been created (Null Shape).

Stored Displays Patch #1868
August 6, 2004  ............................................................................  

This QFE is intended for installation on top of ArcFM 8.3.2 SP2 (build 1860). This patch contains a change to have stored displays persist group layer annotation that is created when labels are converted to annotation and stored in the map.

Multifeed Circuit Loops Patch #1861
July 14, 2004  ............................................................................  

This QFE corrects a bug where loops on multifeed circuits cause hang or crash when tracing.

Synchronizer Message Box Patch #1822
June 15, 2004  ............................................................................  

This QFE corrects a bug where user gets a message box from the synchronizer if one of the packets being imported fails somewhere along the way; this should be a debug message that goes to the log instead of a message box.

Feeder Manager Patch #1818
June 4, 2004  ............................................................................  

This QFE corrects a coding issue interfering with correct identification of loops and energized phases by Feeder Manager in areas where power flows in different directions.

Design Open/ Edit Patch #1816
May 27, 2004  ............................................................................  

This QFE contains performance improvements when opening a design. It also contains changes to disable ability to change a stored display while editing a design in the field.

Structural Analysis Patch #1775
April 12, 2004  ............................................................................  

This QFE corrects a bug where Structural Analysis is generating inaccurate results. It also resolves the following issue: when Structural Analysis is launched from the selection tree or the design tree, the selected conductors are not populated in the form.

Page Template Patch #1773
April 7, 2004  ............................................................................  

This QFE corrects a bug where if user changes a page template the selection set will not display in the Attribute Editor.